Draft Angle

pattern reduce depth

A. The draft angle of mold texturing was not enough so that we will reduce depth gradually.
B. The general rule is that you require 1° of draft for each 13μ of texture finish depth.
Please checked whether your tools need to mold etching in advance when you design the draft Angle of the mold.  You should to know the texturing pattern or grain No. depth and draft Angle so that reserved enough draft Angle of mold to avoiding the dragging mark in the later injection.


Please know WeldingStandard Polish, Acid test, Gloss and Repair to operate your mold detail helpfully.

Purchase Plaques
Pattern R&D
Leather Texture

Acid Test

acid testA. The acid test  on your tools can be finished in your toolmaker of China before mold texturing & mold etching.

B. Yuan Su can be your a third party supervision company for your tools project to acid test in China so that avoiding welding and steel material difference by toolmaker.

C. Yuan Su can issued report and feedback to you about acid test details.

Please know Draft Angle, Welding, Standard Polish to operate mold detail before acid test.
Carbon Fiber Texture
About Us

Standard Polish

Standard polish

1. Cutting Line
2. Polish Line
3. EDM Pattern
4. Steel Line
If your tools need be mold texturing or mold etching after Standard Polish in China. Please see the below information of standard polish before mold texturing

A. The pattern depth of mold texturing is less than 40micron required to achieve the 800# of sandpaper at least .

B. The pattern depth of mold texturing from 40 to 80micron required to achieve the 600# of sandpaper at least .

C. The pattern depth of mold texturing is more than 80micron required to achieve the 400# of sandpaper at least .


Laser Etching
Purchase Plaques
Laser Texture